Low Profile Condensate Pump Kit | #WCP85 | Crawl Space DIY
$79.99
-
The Low Profile Condensate Pump Kit is first and foremost a great condensate pump. It is able to lift water up to 22’ so routing the condensate to a remote drain or sink is no problem.
Low Profile means the inlet ports to the 1/3 Gallon tank sit only 1-3/4” above the ground. Low enough to sit below the factory condensate drain of Aprilaire 1800 Series Dehumidifiers. (That means no cement blocks to raise up the machine!)
Description
Where does the water from the dehumidifier go? Into a drain. How does your dehumidifier water get to the drain? A condensate pump. The Low Profile Condensate Pump Kit is the perfect addition to your Dehumidifier.
The adjustable feed drain port can be adjusted during setup to sit between 1-3/4” to 2-3/4” on all Dehumidifiers. The inlet port of the Low Profile Condensate Pump sits at only 1-3/4” high. This now allows both the pump and the dehumidifier to both sit on the ground. (No need for cement blocks to raise the dehumidifier up to be above the pump.)
The Low Profile Condensate Pump is the perfect addition to any crawl space dehumidifier. It quickly and efficiently diverts and pumps water to your nearest drain. No more worries about your crawl space dehumidifier overflowing and leaving puddles of water.
Features:
- Rated Voltage: 120 Volts/60 Hz
- Rated Current Draw: 1.9 Amps
- Maximum Head Height: 22 ft.
- Flow Rate at Zero Head: 1.6 GPM
- Product Weight: 4.7 lbs.
- Inlet Height from Floor: 1.75″
- LED status lights (Green, Amber, and Red)
Additional information
Weight | 8 lbs |
---|---|
Dimensions | 11 × 15 × 8 in |
Reviews
There are no reviews yet.